Italiano
Português
Espanôl
Française
Český
Deutsch
Türk
Polskiea
Română
Pусский
日本
中国語Ruben Orizio
Head of Tehcnical and Commercial support
Italy / Abroad
Telefono: (+39) 02 66 01 78 78
E-mail:service@tajmac-mtm.it
×
The production program of TAJMAC-ZPS is composed of Swiss-type lathes and multispindle automatic lathes, mechanical and CNC. These machines are used in the most demanding industries in all markets around the world and have gained a very good reputation with their high-level technical parameters, accuracy and reliability.
TAJMAC BRASIL also markets and performs after-sales services and spare parts for Gozio rotary transfers&machining center also industrial automation machines EL-MEC
Mechanical machines of AC series and servo
Traditional concept of cam-controlled turning lathes for large-lot and mass production. The basic configuration is with 6 or 8 spindles, with controlled motors of spindle drives and feeds.
Numerically controlled machines of CNC series
CNC controlled machines on 6 and 8 spindles configuration. Suitable for serial production of technologically highly demanding workpieces.
Mechanical machines of AC series and servo
Traditional concept of cam-controlled turning lathes for large-lot and mass production. The basic configuration is with 6 or 8 spindles, with controlled motors of spindle drives and feeds.
Numerically controlled machines of TMZ series
Fully CNC controlled machines in 5, 6 and 8 spindles configuration. Suitable for serial production of technologically highly demanding workpieces.
We introduce a highly productive Swiss-type Lathes for manufacturing of round bars up to diameter of 32 mm (36 mm) as well as square and hexagon bars. These automatic lathes with sliding headstock expanded the production program of TAJMAC-ZPS a. s. after MANURHIN K’MX acquisition in 2004 and transfer of production from French Mulhouse into the city of Zlín.
Automatic loaders for multi-spindle and single-spindle lathes
Traditional concept of automatic bar loader suitable for large series or mass production. Basic version with 5, 6 or 8 spindles, with several optionals on costumer demnads.
Robust series for heavy bars
We manufacture loaders for each brand and model, robust machines suitable for each type of difficult bar support
CNC machines
Traditional concept of rotary transfer and fifth axis on horizontal and vertical machining center.
Fully numerically controlled machines with different spindles and countless combinations to meet the most difficult requirements. Suitable for the mass production of technologically demanding parts.
Basic configuration with 6 transversal slides, 6 longitudinal slides, and 4 cross slides with conicity setting and central block with independent motion. Siemens Simodrive motors with continuous spindle speed and independent feed, PLC Simatic 7-300.
Basic configuration with six transversal slides, six longitudinal slides, four cross slides with
conicity setting. Four safety clutch for overload, high thermal and dynamic stability, bar machining
up to 32 mm diameter (42 mm for 642).
SIEMENS Simodrive motors with continuous spindle speed and feed, PLC Siemens SIMATIC S 7-300.
Basic configuration with 6 transversal slides, six longitudinal slides, four cross slides with conicity setting. Four safety clutch for overload, high thermal and dynamic stability, bar machining up to 57mm diameters (67 mm for 667). SIEMENS Simodrive motors with continuous spindle speed and feed, PLC Siemens SIMATC S 7-300.
Basic configuration with eight transversal slides, eight longitudinal slides, four cross slides
with conicity setting. Four safety clutchs for overload, high thermal and dynamic stability,
bar machining up to 32 mm diameters (42 mm for 642).
Possibility of second process machining on collet or chuck automatique up to 130 mm diameters.
SIEMENS Simodrive motors with continuous spindle speed and feed, PLC Siemens SIMATC S 7-300
Basic configuration with five cross slides, six longitudinal slides and one radial parting-off slides.
Up to 30 controlled axis, independent spindle revolutions..
Fanuc control system.
Basic configuration with five cross slides, six longitudinal slides and one radial parting-off slides. Up to 28 controlled axis. Fanuc control.
Basic configuration with five cross slides, six longitudinal slides and one radial parting-off slides.
Up to 44 controlled axis, independent spindle revolutions.
Siemens control system Sinumerik SOLUTION LINE.
Basic configuration with 7 cross slides, 8 longitudinal slides and one parting-off slides.
Up to 62 controlled axes, independent spindle revolutions.
Siemens control system Sinumerik SOLUTION LINE.
Basic configuration with 7 cross slides, 8 longitudinal slides and one parting-off slides. Up to 62
controlled axes, independent spindle revolutions.
Siemens control system Sinumerik SOLUTION LINE.
THE MANURHIN K’MX 413 is designed for productive machining of parts for bars with a maximum diameter of 13 m or 16mm
THE MANURHIN K’MX 432 is designed for productive machining of parts for bars with a maximum diameter of 32 m or 36mm (adjustment of bar end is needed)
THE MANURHIN K’MX 532 TREND is designed for productive machining of parts for bars with a maximum diameter of 32 m or 36mm (adjustment of bar end is needed)
THE MANURHIN K’MX 632 is designed for productive machining of parts for bars with a maximum diameter of 32 m or 36mm (adjustment of bar end is needed)
THE MANURHIN K’MX 632 DUO is designed for productive machining of parts for bars with a maximum diameter of 32 m or 36mm (adjustment of bar end is needed)
THE MANURHIN K’MX 732 EVO is designed for productive machining of parts for bars with a maximum diameter of 32 m or 36mm (adjustment of bar end is needed)
THE MANURHIN K’MX 816 CLEVER is designed for the productive machining of parts for bars of a maximum diameter of either 16mm or 20mm.
The MANURHIN K’MX 916 CLEVER is designed for the productive machining of parts for bars of a maximum diameter of either 16mm or 20mm.
The MANURHIN K’MX SWING we deliver in version 1026 for Ø 26 mm bars or 1032 for Ø 32 mm bars (bar end adjustment is needed).
To every purchased machine we offer the following services:
Ruben Orizio
Head of Tehcnical and Commercial support
Italy / Abroad
Telefono: (+39) 02 66 01 78 78
E-mail:service@tajmac-mtm.it
Ruben Orizio
Head of Tehcnical and Commercial support
Italy / Abroad
Telefono: (+39) 02 66 01 78 78
E-mail:service@tajmac-mtm.it